Two more

This shot shows the original fender.....changed it!

Ok....so.........

I am a total slacker with this thing......the blog that is. Here are some pics from the past year or so. I put a lil over a thousand miles on it last year, re-did the back fender and the bars.
It is up for sale......little behind on some of the more important shit.

I started with a Thunderheader slip on that was left over from a wreck. It was off of a bagger so I cut the extension off that is sitting in the vice in this shot.

I also cut the secondary pipe from the original V&H set up and tacked the collector to it.







And so there ya have it, my new upswept Thunderheader, or....the POTATO LAUNCHER.

and den........

With the slices in to top section of the pipe, I strapped the lower side closer to the frame and closed the slices.
Which got the the clearance from the forward controls and the master cylinder.

New 2 into 1 all tacked up..........

So I've had this V&H header kickin around for ever......damaged slip on, but the header and secondary pipe were decent.

The problem is ya cant run this thing with forewards and it was pretty tight to the rear M/C

So I made some marks on both pipes, so I can pull the pipe in tighter on the bottom.

Lighter Is Faster!

Got the cam cover chopped down, just got to decide if I dig the way it works with the sprocket cover........

Still working on the Engine Turning thing......

The problem with doing this on a round object is that you end up with a final mark that is round. Yeah.....its not easy to see, but I can see it...which isn't gonna work.
I have a couple idea's...............
The first thing I tried was to line up a mark with each spoke.....I like but I'm not sold

I am using 1 inch scotch wheels to mark the wheel, there are several ways to lay it out.
Another problem is that you have to sand off the clear coat to mark the aluminum. Therefore youre gonna have to clear it again to prevent corrosion. Clear powdercoat is an option...but I gave my favorite rattle can a shot......I like the red on the black!
I have one more idea on eliminating the final round mark.......I'll try it this week.